Build guide
Mercedes Benz G650 Maybach Mini Ride On Car
Watch the build video.
- 12V
- One Seater
- Up to 6 Years Old
- Remote control
This video can’t play right now. Message us and we’ll help.
Mercedes Benz G650 Maybach Mini Ride On Car Assembly Instructions Open in the video library
Mercedes Benz G650 Maybach Mini Ride On Car at a glance
- Battery
- 12V
- Motors
- 2 x 30W
- Seats
- One Seater
- Maximum rider age
- Up to 6 Years Old
- Seat material
- Leather Style
- Parental features
- Parental Remote Control
- Special features
- Suspension, Functioning Lights, USB Port, Aux In, Integrated Music, Bluetooth Connectivity, Start-Up Sounds, Working Horn, Steering Controls, Leather Style
- Media features
- USB Port, Aux In, Integrated Music, Bluetooth Connectivity, Start-Up Sounds, Working Horn, Steering Controls
- Remote control
- Yes
Shop this model
Mercedes G650 Maybach Mini - Licensed
12V
Up to 6 Years Old
2.4G - Optional Upgrade
One Seater
Something not right?
Why buy from RiiRoo
Full written instructions
- Take a look at the parts list and ensure you have all the items to build.
- Please refer to the parts list in the manual.
- Protect and place the car on a flat surface.
- Remove tape holding motors to the body of the car.
- For the rear wheels, ensure the assembly order of the hardware is as follows - wheel - washer - & finally the nut.
- Attach the rear wheel trim to the relative gaps on the wheel.
- Repeat process on the other side.
- For the front wheels, ensure the assembly order of the hardware is as follows - wheel - washer - & finally the nut.
- Attach the front wheel trim to the relative gaps on the wheel.
- Repeat process on the other side.
- Attach the rear side windows by pushing into place until you hear a click.
- Repeat process on other side.
- Attach the rear storage compartment to the relative gaps on the back of the car.
- Secure it with screws.
- Connect the battery terminal multiplug.
- Once the battery terminals are connected, check to see if the car powers up.
- Attach the side windows to the relative gaps on the doors.
- Secure the side windows with screws.
- Repeat process on other side.
- Connect the steering wheel wire to the multiplug protruding from the steering console.
- Ensure the wire is threaded back through the console once connected to prevent damage.
- Attach the steering wheel to the steering rod.
- Attach the front windshield to the relative gaps on the bonnet.
- Secure it with screws.
- Repeat process on other side.
- Attach the wing mirror by pushing into place until you hear a click.
- Repeat process on the other side.
- Slide seat onto the brackets.
- Secure the seat with screws on both sides.
Need more help?
We reply within one working day, Monday to Friday.
Missing Number Plates?
You can request them here for a much quicker service than going through support!
Self-Service
We have an extensive range of helpful content, including Assembly tutorials and Troubleshooting tips which you can find here
If you can't find your answer there, feel free to get in touch with us.
Phone
We're phone-free for speedy service - opt for video calls for product peeks and tech support!
Will we never ring you!? Occasionally, when it's needed :)
Customer Support
Use the form to reach out, we'll outshine our competitors with speedy responses and superior service!
Sorry, the form didn't load. Please refresh the page and try again.