Jeep Wrangler Rubicon Ride On Car

Before you start

This guide shows how to build the Jeep Wrangler Rubicon. It is a one seater. It has a 12V battery and 4 x 35W of motor power. Recommended for: Up to 7 Years Old.

Have the instruction booklet and its parts list to hand, and check every part against the list before you begin.

Build video

• Jeep Wrangler Rubicon Assembly Video (RiiRoo Kids Ride on Cars) (5 min 17 s)

Step-by-step assembly

1. Unbox and check the parts. Check every part against the parts list in the manual. Protect the vehicle, place it on a flat surface, then remove the tape, elastic band or cable ties holding the motors and wires.
2. Fit the rear wheels. Fit each rear wheel in this order: wheel, washer, then the nut. Attach the wheel trim or cap by lining up the tabs and clicking it into place, then repeat on the other side.
3. Fit the front wheels. Fit each front wheel in the same order: wheel, washer, then the nut. Click the wheel trim or cap into place and repeat on the other side.
4. Attach the steering wheel. Remove the nut and bolt from the steering wheel, then connect the steering wheel wire to the multiplug from the steering console. Thread the wire back through the console, line the wheel up with the steering rod and secure it with the nut and bolt you removed.
5. Fit the seat. Slide the seat onto the brackets and secure it with the screws.
6. Windscreen and wing mirrors. Attach the front windscreen to the gaps on the bonnet. Push each wing mirror into place until you hear a click, then repeat on the other side.

Connect and charge the battery

The Jeep Wrangler Rubicon runs on a 12V battery with 4 x 35W of motor power. Connect the battery terminal multiplug (red to red, black to black) and check that it powers up. If it does not, make sure the clear plastic tab over the terminal has been removed.

Charge the battery for 8 to 12 hours before the first ride, using the supplied charger. The 12V battery should not be used until that first charge is complete. Recharge after every use and every 30 days if it is stored, and keep it indoors. See our battery charging and maintenance guide.

Pairing the parental remote

The parental remote lets you override the vehicle's controls at any time. RiiRoo supplies several remote variants and they are not all cross-compatible, so use the pairing video for your model's remote. More help: how to pair your remote.

Jeep Wrangler Rubicon at a glance

• Voltage: 12V
• Motors: 4 x 35W
• Seats: One Seater
• Recommended age: Up to 7 Years Old
• Parental remote: Yes
• Features: Suspension, Functioning Lights, Spray Painted, Key Start, USB Port, Aux In, Built-In Radio, Integrated Music, Bluetooth Connectivity, Start-Up Sounds, Working Horn, Steering Controls, Leather Style
• Brand: Jeep
• Type: 4 x 4
• Drive: 4 Wheel Drive
• Tyres: EVA Soft Wheels
• Seat belt: Lap Belt
• Doors: Opening Doors, Opening Boot, Opening Bonnet
• Lights and sirens: Functioning Lights
• Power: Electric

Related products

• Jeep Wrangler Rubicon

Need a spare part?

Browse the spare parts for the Jeep Wrangler Rubicon.