
Build guide
BMW I8 2020 Ride On Car Assembly & Instructions
Watch the build video.
- 12V
- One Seater
- Up to 6 Years Old
- Remote control
This video can’t play right now. Message us and we’ll help.
Bmw I8 Style 2020 12v Battery Electric Ride On Car For Kids With Parental Remote Control Assembly Instructions Open in the video library
BMW I8 2020 Ride On Car Assembly & Instructions at a glance
- Battery
- 12V
- Motors
- 2 x 25W
- Seats
- One Seater
- Maximum rider age
- Up to 6 Years Old
- Seat material
- Leather Style
- Parental features
- Parental Remote Control
- Special features
- Suspension, Functioning Lights, USB Port, Aux In, Integrated Music, Start-Up Sounds, Working Horn, Steering Controls, Leather Style
- Media features
- USB Port, Aux In, Integrated Music, Start-Up Sounds, Working Horn, Steering Controls
- Remote control
- Yes
Shop this model
Something not right?
Why buy from RiiRoo
Full written instructions
On this page
- Take a look at the parts list and ensure you have all the items to build.
- Please refer to the parts list in the manual.
- Protect and place the car on a flat surface.
- Line up the motor with the axle and the hole in the body of the car.
- Thread the multiplug wire attached to the motor through the hole in the body of the car.
- For the rear wheels, ensure the assembly order of the hardware is as follows - wheel - washer - & finally the nut.
- Attach the wheel caps by lining up tabs and clicking them into place.
- Repeat process on the other side.
- For the front wheels, ensure the assembly order of the hardware is as follows - wheel - washer - & finally the nut.
- Attach the wheel caps by lining up tabs and clicking them into place.
- Repeat process on the other side.
- Attach the front windshield to the relative gaps on the bonnet.
- Connect the battery terminal and the motor multi-plugs.
- Once the battery terminals are connected, check to see if the car powers up.
- Attach the wing mirror by pushing into place until you hear a click.
- Repeat process on the other side.
- Remove nut and bolt from the steering wheel.
- Ensure the steering wheel is lined up with the hole on the steering rod.
- Secure the steering wheel with the nut and bolt that was previously removed.
- Line up the motor cover with the holes around the motor.
- Secure it with screws.
- Slide seat on the brackets.
- Secure the seat with screws on both sides.
- Insert 2 AA batteries into the steering wheel.
- Re-secure battery cover with screws.
Need more help?
We reply within one working day, Monday to Friday.
Missing Number Plates?
You can request them here for a much quicker service than going through support!
Self-Service
We have an extensive range of helpful content, including Assembly tutorials and Troubleshooting tips which you can find here
If you can't find your answer there, feel free to get in touch with us.
Phone
We're phone-free for speedy service - opt for video calls for product peeks and tech support!
Will we never ring you!? Occasionally, when it's needed :)
Customer Support
Use the form to reach out, we'll outshine our competitors with speedy responses and superior service!
Sorry, the form didn't load. Please refresh the page and try again.
















