Build guide

Audi R8 Spyder SuperSport Ride On Car Assembly & Instructions

Watch the build video.

  • 12V
  • One Seater
  • Up to 5 Years Old
  • Remote control

Audi R8 Licensed Assembly Video Open in the video library

Audi R8 Spyder SuperSport Ride On Car Assembly & Instructions at a glance

Battery
12V
Motors
2 x 35W
Seats
One Seater
Maximum rider age
Up to 5 Years Old
Special features
Suspension, Functioning Lights, Key Start, USB Port, Aux In, Integrated Music, Start-Up Sounds, Working Horn, Steering Controls, Leather Style
Remote control
Yes

Something not right?

Why buy from RiiRoo

Full written instructions
  1. Your new Audi R8 should come with small instruction booklet.
  2. Ensure all of the parts are present before you start to assemble.
  3. Place the body of the car on the floor or alternative flat surface.
  4. Remove tape holding motors to the body of the car.
  5. Attach the wheels (rear first) - (wheel >> trim >> washer >> nut) and then repeat the process on the other side. For the front (washer >> wheel >> trim >> nut).
  6. Turn car over and connect the battery terminal (red to red, black to black).
  7. Remove cable tie holding wires and keys.
  8. Remove nut and bolt from steering wheel.
  9. Connect the steering wheel wire to the multi plug.
  10. Secure the steering wheel nut and bolt.
  11. Attach the front windscreen to the relative gaps of the bonnet.
  12. Slide the seat onto the brackets and secure with screws.
  13. Attach the wing mirrors by pushing into place until you hear a click.
  14. Lastly watch the pairing video for your remote control.

Need more help?

We reply within one working day, Monday to Friday.