Lexus LC500 - Licensed

Build guide

2020 Lexus LC500 Ride On Car Assembly & Instructions

Watch the build video.

  • 12V
  • One Seater
  • Up to 6 Years Old
  • Remote control

2020 Lexus LC500 Licensed 12v Kids Electric Ride On Car Assembly Instructions Open in the video library

2020 Lexus LC500 Ride On Car Assembly & Instructions at a glance

Battery
12V
Motors
2 x 25W
Seats
One Seater
Maximum rider age
Up to 6 Years Old
Seat material
Leather Style
Parental features
Parental Remote Control
Special features
Suspension, Functioning Lights, Spray Painted, USB Port, Aux In, Integrated Music, Start-Up Sounds, Working Horn, Steering Controls, Leather Style
Media features
USB Port, Aux In, Integrated Music, Start-Up Sounds, Working Horn, Steering Controls
Remote control
Yes

Shop this model

5.0
Lexus LC500 - Licensed
Battery Voltage Icon 12V
Max User Age Icon Up to 6 Years Old
Electric Motor Wattage Icon 2.4G - Optional Upgrade
Seat Capacity Icon One Seater
Get it by

Something not right?

Why buy from RiiRoo

Full written instructions
  1. Take a look at the parts list and ensure you have all the items to build.
  2. Please refer to the parts list in the manual.
  3. Protect and place the car on a flat surface.
  4. For the front wheels, ensure the assembly order of the hardware is as follows - wheel - washer - & finally the nut.
  5. Attach the wheel caps by lining up tabs & clicking into place.
  6. Repeat process on the other side.
  7. Thread the multiplug wire attached to the motor through the hole in the body of the car.
  8. Line up the motor with the axle & the hole in the body of the car .
  9. For the rear wheels, ensure the assembly order of the hardware is as follows - wheel - washer - & finally the nut.
  10. Attach the wheel caps by lining up tabs & clicking into place.
  11. Repeat process on the other side.
  12. Connect the battery terminal & motor multiplugs.
  13. Once the battery terminals are connected, check to see if the car powers up.
  14. Remove nut & bolt from steering wheel.
  15. Ensure the steering wheel is lined up with the hole on the steering rod.
  16. Secure the steering wheel with the nut & bolt that was previously removed.
  17. Attach the front windshield to the relative gaps on the bonnet.
  18. Slide seat onto the brackets.
  19. Secure the seat with screws on both sides.
  20. Attach the wing mirror by pushing into place until you hear a click.
  21. Repeat process on the other side.
  22. Insert 2 AA Batteries into the steering wheel.
  23. Re-secure battery cover with screws.

Need more help?

We reply within one working day, Monday to Friday.