8 SIMPLE Steps to the Ultimate Motorcycle Visor Upgrade

Updated: 14.4.25

8 Simple Steps to Upgrade Your Motorcycle Visor

Riding with a foggy or scratched visor isn’t just annoying—it’s unsafe. If you're tired of squinting through streaks, rain spots, or glare, it's time to give your visor a proper upgrade. In this guide, we break down 8 effective and easy ways to enhance your visor's clarity and performance for safer, smoother rides.

Quick Overview: 8 Steps to the Ultimate Visor Upgrade

Essential Tools

• Microfibre cloth
• Anti-fog spray or mild detergent
• Squeegee or card (for film application)
• Shaving cream (for budget fog fix)
• Disposable gloves
• Lint-free cloth

Step-by-Step Breakdown

1. Apply Anti-Fog Coating

A must-have in cold or humid weather. Clean your visor, apply the coating, and gently wipe it with a soft cloth. Brands like Muc-Off and FogTech are popular choices.

2. Use a Rain Repellent Spray

After cleaning the visor, spray a water repellent like Rain-X. It causes rain to bead up and roll off, keeping your view crystal clear even during downpours.

3. Install a Pinlock Insert

A Pinlock insert creates a double-layered visor, preventing fog buildup by creating a thermal barrier. It’s one of the most effective upgrades but be sure to get one that fits your helmet model.

4. Try the Shaving Cream Hack

A classic trick: apply a thin layer of shaving cream, let it sit, then wipe it off. It leaves a temporary anti-fog film. Handy in emergencies or for budget-conscious riders.

5. Keep It Spotless

Regular cleaning is vital. Use mild detergent and a microfibre cloth. Avoid harsh cleaners that can degrade visor coatings. A clean visor boosts visibility and lasts longer.

6. Upgrade to a Helmet with a Sun Visor

These built-in tinted visors drop down like sunglasses and can be flipped up when not needed. Great for sunny rides without needing to swap visors.

7. Add or Use a Helmet Peak

A peak helps block overhead sunlight and is especially useful for off-road and dual-sport riders. It also improves visibility in low-angle sun conditions.

8. Apply a Protection Film

Like a screen protector for your visor. It prevents scratches and makes cleaning easier. Apply slowly using a squeegee or card to smooth out bubbles. Top brands: 3M, XPEL.

Common Mistakes to Avoid

• Using household cleaners: They may damage visor coatings.
• Overapplying sprays: Too much product can cause streaks.
• Skipping regular maintenance: Even upgraded visors need consistent care.

FAQs

How often should I reapply coatings?

Typically every 2–3 weeks or after heavy rain. Follow the product instructions.

Are these upgrades universal?

Most are, but double-check compatibility with your helmet brand.

Can I do it all myself?

Yes! All these upgrades are beginner-friendly, but seek help if you’re unsure—especially for the Pinlock system.

What's the fastest fix?

Anti-fog or rain repellent sprays provide immediate, noticeable improvements in just a few minutes.

Conclusion

Upgrading your visor doesn’t need to be complicated or expensive. With a few tools and a little time, you can dramatically improve your visibility, comfort, and safety on every ride. So go ahead—tune up that visor and ride with confidence!