7 in 1 Tricycle Trike

Before you start

This guide shows how to build the 7 in 1 Tricycle Trike.

Have the instruction booklet and its parts list to hand, and check every part against the list before you begin.

Build video

• 7 in 1 Tricycle Trike (4 min 23 s)

Step-by-step assembly

1. Unbox and check the parts. Check every part against the parts list in the manual, then place the pieces on a flat surface ready to build.
2. Fit the rear wheels. Fit the rear wheels as shown in the build video, using the hardware listed in your manual's parts list.
3. Fit the front wheels. Fit the front wheels as shown in the build video, using the hardware listed in your manual's parts list.
4. Attach the steering. Attach the steering wheel or handlebars as shown in the build video. If the steering wheel has a wire, connect it to the multiplug and thread it back through the console so it is not damaged.
5. Fit the seat. Fit the seat as shown in the build video and make sure it is secure.

Related products

• Personalised Self-Adhesive 14 x 4 cm Number Plate Stickers For Childrens Kids Ride on Car - UK Flag

Need a spare part?

Browse our ride-on spare parts.